6030Five Axis Machining Center
■ High rigidity and thick beam structure, effectively improve the shape of the rail cross-step beam, increase the distance, provide the best axis movement of the y axis True straightness and heavy cutting rigidity. ■ Y-axis adopts heavy roller slide, relatively elevated ball type More than 40% rigidity, provide higher cutting load and higher Service life. ■ Base three (roller) guide rail support, left and right two rail Long span on the studio load center of gravity design, the middle rail To show the most true straightness of the whole trip.
Start the machine tool:
1. After the machine tool is powered on and started, check whether the fans in each device are running normally; Check if all started motors and pumps are running normally and if there are any abnormal sounds.
After confirming that there are no abnormalities, the operator manually moves each axis at low speed to observe whether the display of the movement direction is normal, and whether there is any abnormal sound in the transmission system and each motor. Then return to the reference point and preheat before processing.
During the machining process, if manual measurement of the workpiece is required, the machine must be stopped for measurement by pressing the feed lock button.
4. If the operator needs to perform knife compensation during the operation, they must be careful and careful not to reverse the direction or input the wrong decimal point.
5. If the operator needs to replace the head compartment as necessary during the operation, they need to pay attention to the cleanliness of the head compartment to avoid machine tool alarms.
When loading and unloading workpieces, they must be handled with care, and heavy objects are not allowed to strike the machine tool. Rough operation is strictly prohibited.
7. During the operation of the machine tool, it is strictly prohibited for the operator to leave the operating position of the machine tool; If you need to leave, you need to stop the machine.
8. The operator shall not change the machine tool parameters without authorization.
9. Each filter and filter should be cleaned regularly.
10. During the work process, the operator should pay attention to whether the equipment has any abnormal movements or sounds. If there are any abnormalities, the machine should be stopped in a timely manner and maintenance personnel should be sought for handling.
Hot Tags: 6030five axis machining center, China 6030five axis machining center suppliers, 6150 CNC Car, CNC Inclined Lathe, Vertical CNC Lathe Source, 5030 CNC Gantry Machining Center, Horizontal Lathe, High Precision CNC Lathe
Send Inquiry
