VMC550 Vertical Machining Center
The base parts are made of high-strength cast iron and aged to ensure the stability of accuracy; X, Y, Z three direction feed using large pitch, high precision and high strength ball screw, feed speed is high; The servo motor is directly connected with the lead screw using the elastic coupling to ensure the positioning accuracy of the machine. The lead screw is pre-drawn structure, which greatly reduces the influence of thermal deformation on the positioning accuracy;
Product Features
1. X, Y, Z three-axis travel: 800x550x550mm.
2. The main shaft rotation method is belt connection, with a speed of 8000 revolutions per minute (with ring spray).
3. The standard configuration of the knife magazine is a disc with 24 knife magazines, meeting the needs of customers.
4. The head group is a heavy-duty box shaped structure with reinforced internal ribs and high rigidity.
5. The spindle cutting method adopts a pneumatic mechanism, which evenly applies force to the spindle during cutting and extends the bearing life.
6. The electrical box adopts an internal isolation design, separating the heat source part of the controller and using heat in the front
Heat exchanger to dissipate heat and prevent external dust from entering the electrical box; The rear side uses a fan to dissipate heat from the fan heating plate.
7. The three-axis adopts high-precision ball screws, combined with precision nut preloading and tail end pre pulling devices, to ensure the back of the machine
The gap and thermal deformation remain at low values for a long time.
Hot Tags: vmc550 vertical machining center, China vmc550 vertical machining center suppliers, Vertical Machining Center, Five axis Gantry Machining Center, Lightweight CNC Machining Lathes, Vertical CNC Lathe Source, Vertical Pin Center, Gantry Machining Center
Send Inquiry
